All Products
-
Humidity Temperature Sensors
-
RTD Temperature Sensor
-
NTC Thermistor Temperature Sensor
-
Digital Temperature Sensor
-
Thermocouple Temperature Sensor
-
Submersible Liquid Level Sensor
-
Pressure Transmitter Sensor
-
Water Depth Meter
-
Ultrasonic Level Meters
-
Turbine Flow Meters
-
Ultrasonic Pipe Flow Meter
-
Electromagnetic Flow Meter
-
Digital Thermostat Controller
-
Gas Detection Sensor
-
w***Nel, USI worked with Jack Yin, he was extremely helpful, willing to accommodate all my customizations and provided an excellent quality product. Thanks Jack, will work with you and Votesen again. -
T***ard,NORVery trustful supplier！
-
S***yan,NGRGreat product. Good delivery time. Now my project is on course!
Contact Person :
Mike Su
Phone Number :
+8617782470268
WhatsApp :
+8617782470268
High Temperature Melt Pressure Transmitter 10VDC Melt Pressure Sensor
Product Details
| Pressure Range | 0~150Mpa,0~20000PSI | Accuracy | 0.5%FS |
|---|---|---|---|
| Output Signal | 3.33mV/V; 2mV/V ; 4~20mA ; 0~10V | Process Connection | M14*1.5, [ M18 *1.5,1/2"-20 UNF](Customer Design) |
| Power Supply | 10VDC (6--12VDC) | Stability | 0.2%F.S |
| Electrical Connection | Direct Cable, 4PIN/5PIN Connector | ||
| High Light | High temperature melt pressure transmitter,melt pressure transmitter 10VDC,10VDC melt pressure sensor |
||
Product Description
High temperature melt pressure transmitter for Plastic fiber, spinning, polyester, rubber solid liquid
Introduction
PT124 Series Melt Pressure Transducer can achieve the pressure and temperature measuring. This series adopt special material and alloy elastic membrane to low down temperature draft and improve accuracy. The zero & full span can be calibrated, with amplify signal be connected with PLC, and internal 80% calibration. It has the wide application in high-temp liquid pressure measurement and control such as Chemical & Fiber equipment, polyester equipment, etc.
PARAMETERS
Range: 0….10Mpa to 0….150MPa (0…1500psi to 0…20000psi)
Output: 3.33mV/V; 2mV/V ; 4~20mA ; 0~10V
Accuracy: ±0.5%FS
Excitation: 10VDC (6--12VDC)
Repeatability: ±0.2%
Diaphragm material: 15-5PH
Bridge resistance: 350 ohms±10%
Overload pressure: 1.5×FSO
Internal calibration: 80%FSO±1%
Insulation Resistance: 1000Megohms @50Vdc
Max. Diaphragm Temp: 350℃
Electric connector: 5PIN, 6PIN, 8PIN
Process connector: M14×1.5, [M18×1.5,1/2″-20UNF](Customer design)
Rigid stem length:6"(152mm) , 9"(230mm)
Flexible stem length:18"(460mm)
Recommended Products